Inhibition of IL-17 signaling in macrophages underlies the anti-arthritic effects of halofuginone hydrobromide: Network pharmacology, molecular docking, and experimental validation.

BACKGROUND: Rheumatoid arthritis (RA) is a prevalent autoimmune disease marked by chronic synovitis as well as cartilage and bone destruction. Halofuginone hydrobromide (HF), a bioactive compound derived from the Chinese herbal plant Dichroa febrifuga Lour., has demonstrated substantial anti-arthritic effects in RA. Nevertheless, the molecular mechanisms responsible for the anti-RA effects of HF remain unclear. METHODS: This study employed a combination of network pharmacology, molecular docking, and experimental validation to investigate potential targets of HF in RA. RESULTS: Network pharmacology analyses identified 109 differentially expressed genes (DEGs) resulting from HF treatment in RA. Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) analyses unveiled a robust association between these DEGs and the IL-17 signaling pathway. Subsequently, a protein-protein interaction (PPI) network analysis revealed 10 core DEGs, that is, EGFR, MMP9, TLR4, ESR1, MMP2, PPARG, MAPK1, JAK2, STAT1, and MAPK8. Among them, MMP9 displayed the greatest binding energy for HF. In an in vitro assay, HF significantly inhibited the activity of inflammatory macrophages, and regulated the IL-17 signaling pathway by decreasing the levels of IL-17 C, p-NF-κB, and MMP9. CONCLUSION: In summary, these findings suggest that HF has the potential to inhibit the activation of inflammatory macrophages through its regulation of the IL-17 signaling pathway, underscoring its potential in the suppression of immune-mediated inflammation in RA.

Analysis of the coupled flows of aluminum and copper in household air conditioning system.

The global "copper-poor and aluminum-rich" situation has made the possibility of "copper saving with aluminum" an important topic. This study established a framework for analyzing multiple substances' coupled flows at the product level based on material flow analysis (MFA), and took the household air conditioning system of the Chinese mainland in 2020 as an example to characterize the coupled flows of aluminum and copper. The results showed that the system consumed 0.69 million tons of aluminum and 2.10 million tons of copper, and discharged 0.17 million tons of aluminum and 0.43 million tons of copper to the environment cumulatively to achieve 13.2 million terajoules of final heat exchanged and serve 1.24 billion square meters during lifetime in mainland China alone, secondary aluminum and copper accounted for only 22.61% and 24.83% of the total consumption, and the in-use stocks increased by 0.19 million tons of aluminum and 0.70 million tons of copper. The external dependency of copper ore was 92.83%, which was significantly higher than the 44.29% of bauxite. The comprehensive utilization efficiency of copper reached 77.88%, which was slightly higher than the 70.80% of aluminum. The conclusion indicates that under the premise of meeting use requirements, promoting "replacing copper with aluminum" can improve the stability and safety of China's material supply chain, but there is a need to further boost the production efficiency of aluminum in primary production.

[Multi-component content determination of Dracocephalum tanguticum by quantitative analysis of multi-components by single-marker].

This study aims to establish a method for the simultaneous determination of 7 active components in Dracocephalum tanguticum and to evaluate the quality of medicinal materials from different habitats. The method was established with high performance liquid chromatography(HPLC) and the gradient elution was performed with the mobile phase of acetonitrile-methanol-0.2% phosphoric acid solution at a column temperature of 35 ℃, an injection volume of 15 µL, and a flow rate of 0.6 mL·min~(-1). The detection wavelength was set as 215 nm. With rosmarinic acid as the internal reference, the relative correction factors and the content of other 6 components were calculated. The results were compared with those obtained with the external standard method. The results showed that the samples from Huangzhong county, Qinghai province had the best quality, with the highest content of p-hydroxybenzoic acid, cosmosiin, rosmarinic acid, oleanolic acid, and ursolic acid(9.29, 12.14, 6.02, 3.11, 17.67 mg·g~(-1) respectively). The samples from Chaya county, Tibet autonomous region ranked the second, with the highest content of betulin and betulinic acid(15.53, 7.17 mg·g~(-1), respectively). The method is accurate, reliable, and repeatable and suitable for the simultaneous determination of multiple components in D. tanguticum. The content of functional components varied in the samples from different producing areas and can be used as the indicator for the quality evaluation of medicinal materials.

Spirituality and Attitudes Toward Death Among Older Adults in Rural and Urban China: A Cross-Sectional Study.

The purpose of this study was to investigate spirituality and attitudes toward death among rural and urban elderly. We asked 134 older adults from rural areas and 128 from urban areas to complete a self-administrated questionnaire including the Spiritual Self-assessment Scale and Death Attitude Scale. The fear and anxiety of death, escape acceptance, natural acceptance, approach acceptance, and death avoidance scores of older adults living in rural areas were higher than those living in urban areas. The construction of social infrastructure and medical care should be strengthened in rural areas so as to improve older adults' attitudes toward death.

The Mechanism of Action of Ginkgolic Acid (15:1) against Gram-Positive Bacteria Involves Cross Talk with Iron Homeostasis.

With the increasing reports of community-acquired and nosocomial infection caused by multidrug-resistant Gram-positive pathogens, there is an urgent need to develop new antimicrobial agents with novel antibacterial mechanisms. Here, we investigated the antibacterial activity of the natural product ginkgolic acid (GA) (15:1), derived from Ginkgo biloba, and its potential mode of action against the Gram-positive bacteria Enterococcus faecalis and Staphylococcus aureus. The MIC values of GA (15:1) against clinical E. faecalis and S. aureus isolates from China were ≤4 and ≤8 µg/mL, respectively, from our test results. Moreover, GA (15:1) displayed high efficiency in biofilm formation inhibition and bactericidal activity against E. faecalis and S. aureus. During its inhibition of the planktonic bacteria, the antibacterial activity of GA (15:1) was significantly improved under the condition of abolishing iron homeostasis. When iron homeostasis was abolished, inhibition of planktonic bacteria by GA (15:1) was significantly improved. This phenomenon can be interpreted as showing that iron homeostasis disruption facilitated the disruption of the functions of ribosome and protein synthesis by GA (15:1), resulting in inhibition of bacterial growth and cell death. Genetic mutation of ferric uptake regulator (Fur) led to GA (15:1) tolerance in in vitro-induced resistant derivatives, while overexpression of Fur led to increased GA (15:1) susceptibility. Additionally, GA (15:1) significantly decreased the bacterial loads of S. aureus strain USA300 in the lung tissues of mice in a pneumonic murine model. Conclusively, this study revealed an antimicrobial mechanism of GA (15:1) involving cross talk with iron homeostasis against Gram-positive pathogens. In the future, the natural product GA (15:1) might be applied to combat infections caused by Gram-positive pathogens. IMPORTANCE The increasing emergence of infectious diseases associated with multidrug-resistant Gram-positive pathogens has raised the urgent need to develop novel antibiotics. GA (15:1) is a natural product derived from Ginkgo biloba and possesses a wide range of bioactivities, including antimicrobial activity. However, its antibacterial mechanisms remain unclear. Our current study found that the function of ferric uptake regulator (Fur) was highly correlated with the antimicrobial activity of GA (15:1) against E. faecalis and that the antibacterial activity of GA (15:1) could be strengthened by the disruption of iron homeostasis. This study provided important insight into the mode of action of GA (15:1) against Gram-positive bacteria and suggested that GA (15:1) holds the potential to be an antimicrobial treatment option for infection caused by multidrug-resistant Gram-positive pathogens.

Develop spinel structure and quantify phase transformation for nickel stabilization in electroplating sludge.

Nickel-laden electroplating sludge (Ni sludge) has always been a critical concern due to its potential hazards to the environment. This study proposed a strategy to stabilize nickel (Ni) via phase transformation into stable crystal structures through ceramic sintering. The Ni sludge was collected, and then fired with two ceramic precursors (α-Fe2O3 and γ-Al2O3) within a temperature range of 700-1400 °C for 5 h. After sintering scheme, phase identification was performed on the products, showing the NiFe2O4 and NiAl2O4 spinels as predominant Ni-hosting phases respectively in α-Fe2O3 and γ-Al2O3 series. Then, the Rietveld refinement was applied to quantify weight fractions of all phases (including crystal and amorphous phases), and the quantification results showed that the weight fractions of NiFe2O4 or NiAl2O4 spinels can reach around 87.7% and 83.1%, respectively in 1200 °C sintered products of both series. The transformation ratio (TR) of Ni was calculated as 99.9% and 99.7% accordingly, showing almost complete incorporation of Ni into the spinel structures. With a prolonged leaching procedure, the Ni stabilization effect after sintering was evaluated. The Ni leachability was dramatically decreased with the development of spinel structure under sintering processes, and the Ni leached ratio from the sintered products can reach lower than 0.06% even after 20-d prolonged leaching. Through this study, a promising and quantitative method was proposed for controllable Ni stabilization of the hazardous industrial sludge via developing spinel structures in the sintered products, which may provide a feasible strategy for the treatment and beneficial utilization of heavy metal-laden solid wastes.

Effect of the polyphenol-rich extract from Allium cepa on hyperlipidemic sprague-dawley rats.

Allium cepa is used for the prevention and treatment of hyperlipidemia-related diseases such as atherosclerosis in the folk. This study was mainly aimed at investigating the effects of A. cepa extract (ACE) enriched in polyphenols on hyperlipidemia Sprague-Dawley (SD) experiment rat models. The levels of total cholesterol (TC), triglyceride (TG), low-density lipoprotein cholesterol (LDL-C), high-density lipoprotein cholesterol (HDL-C), malondialdehyde (MDA), and superoxide dismutase (SOD) activity in serum and liver were measured using ELISA kits. In addition, hematoxylin-eosin (HE) technique was used to observe the liver and the aortic arch pathology. Moreover, western blotting (WB) method was applied to analyze LDL receptor (LDLR) and 3-hydroxy-3-methylglutaryl (HMG)-CoA reductase (HMGCR) in liver. As a result, quercetin (2.42 mg/g DW) and isoquercitrin (4.60 mg/g DW) were the main constituents of ACE using HPLC analysis. Furthermore, ACE reduced the levels of TC, TG, LDL-C, and MDA, and increased HDL levels and elevated SOD activity both in serum and liver in hyperlipidemic SD rats (p < .05). HE results showed that liver fat drops of the rats in ACE group were obviously decreased, and the lipid and foam cells of the aortic arch of the rats in ACE group were markedly ameliorated. WB results showed that ACE promoted the degradation of HMGCR and increased LDLR expression in liver (p < .05). In conclusion, ACE alleviated hyperlipidemia with downregulation of HMGCR and upregulation of LDLR. PRACTICAL APPLICATIONS: Atherosclerosis, a major cardiovascular disease, is the leading cause of mortality and morbidity in the developed countries. Moreover, accumulating data indicate that, during atherosclerosis development, hyperlipidemia is an important risk factor. To date, hyperlipidemia is mainly treated with hyperlipidemic agents including statins, in spite of the side effects and poor tolerance in some patients. In addition, Allium cepa is a medicinal and edible plant. Furthermore, A. cepa is used for the prevention and treatment of hyperlipidemia-related diseases such as atherosclerosis in the folk. But the underlying mechanism is still unclear. In fact, this research showed that A. cepa extract (ACE) alleviated hyperlipidemia with downregulation of HMGCR and upregulation of LDLR, suggesting that ACE might be a potential option for hyperlipidemia as non-statin lipid-lowering agent.

Enhanced phosphorus availability and heavy metal removal by chlorination during sewage sludge pyrolysis.

Increasing attention has been paid on the application of sewage sludge-derived biochar as soil amendments, but is always limited by heavy metals. This study conducted experiments on heavy metal removal by adding chlorinating agents (PVC, NaCl, MgCl2, CaCl2) during sludge pyrolysis. The chlorides addition can largely remove heavy metals by achieving the highest removal efficiency with dosage of 80 g(Cl)/kg(dry sludge) at 700 °C. The most effective removal effect was observed for Zn, Mn, Cu and Pb, with removal efficiency from 37.44% to 99.45%, 5.24% to 93.64%, 9.11% to 86.15% and 16.57% to 90.75%, respectively for the sludge before and after chlorination. Furthermore, the P-solubility in neutral ammonium citrate (Pnac) was enhanced after chlorination and the maximum P-solubility can be obtained at 700 °C for each series. After 700 °C pyrolysis, the P-solubility was significantly increased from 40.08% of the sludge biochar to 72.07%, 74.05%, 74.00% and 76.57% of the biochar obtained after adding PVC, NaCl, CaCl2, and MgCl2, respectively. The highest P-solubility was observed in samples with MgCl2 due to the formation of Mg3(PO4)2. This study proposed a novel method to use the sludge biochar as potential P-fertilizer with effective heavy metal removal, finally achieving a "waste-to-resource" strategy for integrated management of sewage sludge.

Fabrication of nano CuAl2O4 spinel for copper stabilization and antibacterial application.

With widely reported antibacterial potential, the copper-containing nanoparticles have become attractive antibacterial agents to prohibit the undesirable bacterial adhesion and growth. However, after applying the copper-containing agents in the environment, the potential leaching and bioaccumulation of copper ions may cause severe environmental contamination and irreversible health problems. Therefore, the nano CuAl2O4 spinel was fabricated as a novel copper-stabilized antibacterial agent with much minimized copper leachability. Results show the successful fabrication of nano CuAl2O4 spinel as well-shaped polyhedral particles with maximum length of ˜100 nm and width of ˜50 nm. The optimal parameters for the synthesis of CuAl2O4 include pH value of 11.0, sintering temperature of 1000 °C, dwelling time of 3 h, and the heating rate of 5 °C/min. The leaching test also confirmed the superiority of the nano CuAl2O4 in copper stabilization. The beneficial antibacterial activity of the nano CuAl2O4 was further testified by an obvious decrease in the amount of Escherichia coli in a medium with addition of the CuAl2O4 spinel. Besides the growth mechanisms of the nano-particles, this work has also innovatively demonstrated a strategy to replace the traditional antibacterial agents by a novel, long-lasting nano CuAl2O4 with little copper leachability.

Nano CuAl2O4 spinel mineral as a novel antibacterial agent for PVDF membrane modification with minimized copper leachability.

The employment of copper-containing antibacterial agents for membrane modification can constrain undesirable bacterial adhesion and growth in an effective and economical way. However, copper ion may be leached out and cause further toxicity after applying those materials for membrane processes. Therefore, in this study, nano CuAl2O4 spinel was synthesized as a novel copper-containing material which was expected to have good antibacterial activity and simultaneously stabilize copper ions by its intrinsic structure. The obtained nano spinel was applied for membrane modification via both doping and coating methods. Results show that the addition of nano CuAl2O4 spinel during doping process can change polyvinylidene fluoride (PVDF) membrane properties (crystallization, tensile strength, porosity, pore size distribution, permeate flux and bovine serum albumin (BSA) rejection) obviously, but no obvious change was observed for the coated membrane except increased hydrophilicity and permeate flux. Most importantly, the amount of bacteria attachment was found to reduce significantly (˜68%) on the membrane coated with nano spinel, which indicates the successful application of nano CuAl2O4 spinel as a novel antibacterial agent for membrane modification without extra concern of copper toxicity.

Dopamine receptor D2, but not D1, mediates descending dopaminergic pathway-produced analgesic effect in a trigeminal neuropathic pain mouse model.

Neuropathic pain represents a challenge to clinicians because it is resistant to commonly prescribed analgesics due to its largely unknown mechanisms. Here, we investigated a descending dopaminergic pathway-mediated modulation of trigeminal neuropathic pain. We performed chronic constriction injury of the infraorbital nerve from the maxillary branch of trigeminal nerve to induce trigeminal neuropathic pain in mice. Our retrograde tracing showed that the descending dopaminergic projection from hypothalamic A11 nucleus to spinal trigeminal nucleus caudalis is bilateral. Optogenetic/chemogenetic manipulation of dopamine receptors D1 and D2 in the spinal trigeminal nucleus caudalis produced opposite effects on the nerve injury-induced trigeminal neuropathic pain. Specific excitation of dopaminergic neurons in the A11 nucleus attenuated the trigeminal neuropathic pain through the activation of D2 receptors in the spinal trigeminal nucleus caudalis. Conversely, specific ablation of the A11 dopaminergic neurons exacerbated such pain. Our results suggest that the descending A11-spinal trigeminal nucleus caudalis dopaminergic projection is critical for the modulation of trigeminal neuropathic pain and could be manipulated to treat such pain.

Data processing to support explication about effect of mineral constituents on temperature-dependent structural characterization of carbon fractions in sewage sludge-derived biochar.

This dataset is the supplementary data for the summited research article Li et al., 2017 [1] and provides detailed data profiles to support the explication about mineral constituents' effect on temperature-dependent structural characterization of carbon fractions in sewage sludge-derived biochar. The elemental compositions of major inorganics in the sewage sludge were detected by X-ray fluorescence spectrometry (XRF, S2-Ranger, Bruker).The images from scanning electron microscope (SEM) were compared between unwashed and acid-washed samples, and revealed the effect of acid washing on the surface morphology and porosity of sewage sludge and the biochar. Peak deconvolution was conducted for the (002) peak of X-ray diffraction (XRD) patterns from the acid-washed samples, which provided information on structural parameters of the carbon stacking structure and the temperature-dependent structure evolution of sewage sludge biochar. Peak deconvolution was also carried out for Raman data of the samples with/without consideration of mineral constituents (aluminosilicates). Results of Raman peak deconvolution showed structure ordering evolution with pyrolysis temperature and evidenced the contribution of mineral constituents to the Raman signals.

Phosphorus speciation in sewage sludge and the sludge-derived biochar by a combination of experimental methods and theoretical simulation.

Sewage sludge is an inevitable byproduct from municipal wastewater treatment processes and conversion of sewage sludge into high value-added biochar is an effective strategy for resource utilization of sewage sludge. The characterization on P speciation is important to control the practical applications and environmental behavior of the sewage sludge and its derived biochar. The mobility and bioavailability of P is closely related to its speciation, but knowledge gap in P speciation is still existed which needs to be narrowed by a systematic study including existing experimental methods and techniques as well as theoretical prediction. To achieve a comprehensive understanding of P speciation, this study conducted a series of research combining conventional fractionation of P with consideration of major concomitant elements (Al, Ca, Fe), advanced analytical techniques (solution and solid-state 31P nuclear magnetic resonance (NMR), X-ray diffraction (XRD)), and theoretical simulation with respect to solubility of major elements in different acid-base extractants. Results showed that Ca and Fe were dominantly extracted by HCl whereas P and Al were both NaOH- and HCl-soluble. Inorganic orthophosphates were detected as predominant molecular configurations of P from solution 31P NMR spectra, while the existence of calcium and aluminum orthophosphates was revealed by solid-state 31P NMR. Moreover, the poor-crystalline AlPO4 mineral was further evidenced by XRD patterns of the sewage sludge and biochar. Finally, a theoretical simulation of P-containing minerals was performed on the basis of results above, which suggested the existence of variscite/berlinite and amorphous Ca3(PO4)2 in the sludge and biochar. This study does not only explore the P speciation in the sewage sludge and its derived biochar, but also provides a methodology for further research on P speciation. Through the intensive study on the environmental behavior of P, this work might further contribute to the fundamental knowledge basis for the recycle of P during integrate waste management.

Alumina polymorphs affect the metal immobilization effect when beneficially using copper-bearing industrial sludge for ceramics.

The feasibility of recycling copper-bearing industrial sludge as a part of ceramic raw materials was evaluated through thermal interaction of sludge with aluminum-rich precursors. To observe copper incorporation mechanism, mixtures of copper-bearing sludge with alumina polymorphs (γ-Al2O3 and α-Al2O3) were fired between 750 and 1250°C. Different copper-hosting phases were identified by X-ray diffraction, and CuAl2O4 was found to be the predominant phase throughout the reactions. The experimental results indicate different CuAl2O4 initiating temperatures for two alumina materials, and the optimal temperature for CuAl2O4 formation is around 1100°C. To monitor the stabilization effect, prolonged leaching tests were carried out to leach sintered products for up to 20d. The results clearly demonstrate a substantial decrease in copper leachability for products with higher CuAl2O4 content formed from both alumina precursors despite their different sintering behavior. Meanwhile, the leachability of aluminum was much lower than that of copper, and it decreased by more than fourfold through the formation of CuAl2O4 spinel in γ-Al2O3 system. This study clearly indicates spinel formation as the most crucial metal stabilization mechanism when sintering multiphase copper-bearing industrial sludge with aluminum-rich ceramic raw materials, and suggests a promising and reliable technique for reusing industrial sludge.

Zinc stabilization efficiency of aluminate spinel structure and its leaching behavior.

The feasibility of immobilizing zinc in contaminated soil was investigated by observing the role of zinc reacting with aluminum-rich materials under thermal conditions. To observe the process of zinc incorporation, mixtures of ZnO with alumina precursors (γ-Al(2)O(3) and α-Al(2)O(3)) were fired at 750-1450 °C. Both precursors crystallochemically incorporated zinc into the ZnAl(2)O(4) spinel structure. The incorporation efficiencies of a 3 h sintering scheme were first quantitatively determined by Rietveld refinement analysis of X-ray diffraction data. Different zinc incorporation behavior by these two precursors was revealed, although both resulted in nearly 100% transformation at the highest temperature. Different product microstructures and thermal densification effects were found by observing the sintered products from these two precursors. The leaching performances of ZnO and ZnAl(2)O(4) were compared by a prolonged acid leaching test for 22 d. The leachability analysis pointed to superiority of the ZnAl(2)O(4) structure in stabilizing zinc, suggesting a promising technique for incorporating zinc into the aluminum-rich product. Finally, the sludge collected from water treatment works was calcined and used as an aluminum-rich material to test its ability to stabilize zinc. Successful formation of ZnAl(2)O(4) indicated good potential for employing waterworks sludge to thermally immobilize hazardous metals as a promising waste-to-resource strategy.

Copper stabilization via spinel formation during the sintering of simulated copper-laden sludge with aluminum-rich ceramic precursors.

The feasibility of incorporating copper-laden sludge into low-cost ceramic products, such as construction ceramics, was investigated by sintering simulated copper-laden sludge with four aluminum-rich ceramic precursors. The results indicated that all of these precursors (γ-Al(2)O(3), corundum, kaolinite, mullite) could crystallochemically stabilize the hazardous copper in the more durable copper aluminate spinel (CuAl(2)O(4)) structure. To simulate the process of copper transformation into a spinel structure, CuO was mixed with the four aluminum-rich precursors, and fired at 650-1150 °C for 3 h. The products were examined using powder X-ray diffraction (XRD) and scanning electron microscopic techniques. The efficiency of copper transformation among crystalline phases was quantitatively determined through Rietveld refinement analysis of the XRD data. The sintering experiment revealed that the optimal sintering temperature for CuAl(2)O(4) formation was around 1000 °C and that the efficiency of copper incorporation into the crystalline CuAl(2)O(4) structure after 3 h of sintering ranged from 40 to 95%, depending on the type of aluminum precursor used. Prolonged leaching tests were carried out by using acetic acid with an initial pH value of 2.9 to leach CuO and CuAl(2)O(4) samples for 22 d. The sample leachability analysis revealed that the CuAl(2)O(4) spinel structure was more superior to stabilize copper, and suggested a promising and reliable technique for incorporating copper-laden sludge or its incineration ash into usable ceramic products. Such results also demonstrated the potential of a waste-to-resource strategy by using waste materials as part of the raw materials with the attainable temperature range used in the production of ceramics.

Copper aluminate spinel in the stabilization and detoxification of simulated copper-laden sludge.

This study aims to evaluate the feasibility of stabilizing copper-laden sludge by the application of alumina-based ceramic products. The processing temperature, material leaching behaviour, and the effect of detoxification were investigated in detail. CuO was used to simulate the copper-laden sludge and X-ray Diffraction was performed to monitor the incorporation of copper into the copper aluminate spinel (CuAl(2)O(4)) phase in ceramic products. It was found that the development of CuAl(2)O(4) increased with elevating temperatures up to and including 1000 degrees C in the 3h short-sintering scheme. When the sintering temperature went above 1000 degrees C, the CuAl(2)O(4) phase began to decompose due to the high temperature transformation to CuAlO(2). The leachability and leaching behaviour of CuO and CuAl(2)O(4) were compared by usage of a prolonged leaching test modified from US EPA's toxicity characteristic leaching procedure. The leaching results show that CuAl(2)O(4) is superior to CuO for the purpose of copper immobilization over longer leaching periods. Furthermore, the detoxification effect of CuAl(2)O(4) was tested through bacterial adhesion with Escherichia coli K12, and the comparison of bacterial adhesion on CuO and CuAl(2)O(4) surfaces shows the beneficial detoxification effect in connection with the formation of the CuAl(2)O(4) spinel. This study demonstrates the feasibility of transforming copper-laden sludge into the spinel phase by using readily available and inexpensive ceramic materials, and achieving a successful reduction of metal mobility and toxicity.